FRP resinのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

FRP resin(frp) - メーカー・企業と業務用製品 | イプロスものづくり

FRP resinの製品一覧

1～7 件を表示 ／ 全 7 件

表示件数
DSR Shell Chair FRP Resin [Matte Black]

DSR Shell Chair FRP Resin [Matte Black]

Reproduced furniture focused on quality and price from E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948. It achieved an impressive second place. At that time, Charles Eames was striving to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully produced the chair using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesives using a mold and finally shaping the exterior, was released to the world as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, with options for the legs being wood legs or a rod base. This is the side shell chair with a rod base. *The product is a reproduction imported and sold by E-comfort.

  • Office furniture
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
DSR Shell Chair FRP Resin [Matte Lime]

DSR Shell Chair FRP Resin [Matte Lime]

Reproduced furniture focused on quality and price by E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture non-profit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948. It achieved an impressive second place. At that time, Charles Eames was striving to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully produced the chair using FRP, which was a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair with a rod base. *The product is a reproduction imported and sold by E-comfort.

  • Office furniture
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
DSR Shell Chair FRP Resin [Matte White]

DSR Shell Chair FRP Resin [Matte White]

Reproduced furniture focused on the quality and price of E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it impressively won second place. At that time, Charles Eames was striving to realize a new era of design that could be mass-produced using molded plywood, but the production using molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully brought the chair to market using FRP, which was a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair using the rod base. *The product is a reproduction imported and sold by E-comfort.

  • Office furniture
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
DSR Shell Chair FRP Resin [Matte Gray]

DSR Shell Chair FRP Resin [Matte Gray]

Reproduced furniture with a focus on quality and price from E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it achieved an impressive second place. At that time, Charles Eames was trying to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully brought the product to market using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair using the rod base. *The product is a reproduction imported and sold by E-comfort.

  • Office furniture
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
DSR Shell Chair FRP Resin [Matte Red]

DSR Shell Chair FRP Resin [Matte Red]

Reproduced furniture focused on the quality and price of E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture nonprofit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it achieved an impressive second place. At that time, Charles Eames was trying to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully brought the chair to market using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, with options for wood legs or a rod base. This is the side shell chair using the rod base. *The product is a reproduction imported and sold by E-comfort.

  • Office furniture
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
DSR Shell Chair FRP Resin [Matte Pale Blue]

DSR Shell Chair FRP Resin [Matte Pale Blue]

Reproduced furniture focused on the quality and price of E-comfort.

The Shell Chair is one of the works submitted to the "Low-Cost Furniture Design Competition," co-hosted by a furniture non-profit organization as part of MoMA's efforts to differentiate itself from other museums by collecting modern design products in 1948, and it impressively won second place. At that time, Charles Eames was trying to realize a new era of design that could be mass-produced using molded plywood, but the production with molded plywood proved to be extremely difficult. Eames did not give up on commercialization and successfully produced the chair using FRP, a new material at the time. The chair, produced by layering fiberglass wool with adhesive using a mold and finally shaping the exterior, was released to the world as an innovative mass-produced item. The E-comfort Shell Chair is available in six colors for the seat: black, white, gray, red, pale blue, and pale green, and you can choose between wood legs and a rod base. This is the side shell chair with a rod base. *The product is a reproduction imported and sold by E-comfort.

  • Office furniture
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Pull-out molding CFRP resin "CBZ"

Pull-out molding CFRP resin "CBZ"

CBZ is a CFRP resin suitable for pull-out molding. Compared to pull-out materials using epoxy resin, productivity improves by 2 to 3 times.

CBZ manufactures many parts using pull-out molding. We have a strong track record due to high strength and good productivity. Feedback from pull-out molding manufacturers: "We can produce at three times the speed when using epoxy resin, which has improved productivity. The properties of CFRP are equal to or better than those of epoxy resin, and there are no issues." 【Features of CBZ】 ■ High adhesion to carbon fibers sized for epoxy resin ■ High adhesion to glass, aramid, and basalt fibers ■ Provision of CFRP with excellent bending, compression, and interlaminar shear strength ■ Low water absorption ■ Moisture resistance, oil resistance, and gasoline resistance ■ Fast curing achieved through radical polymerization. *For more details, please refer to the PDF document or feel free to contact us.

  • 引抜成形.png
  • Composite Materials
  • plastic
  • FRP resin

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

FRP resinに関連する検索キーワード

FRP resinの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.